VS28X8X1400 DUN Dunlop Variable Speed V-Belt Type_Double Sided Timing Belt Special designs with raw edges

Special designs with raw edges that allow higher slipping resistance even when they are working with low installation tensions

allowing use in common HTD systems including 3M

3L 310 / 787 La Garden Belt

where the letter designates its cross-section and the number corresponds to a nominal internal length in inches and to DIN standard e

the letter W followed by a number e

VS28X8X1400 DUN Dunlop Variable Speed V-Belt Type_Double Sided Timing Belt Special designs with raw edgesOur range of Variable Speed V Belts includes belts conforming to ISO R 1604, they are designated by e. g. the letter W followed by a number e. g. 16 which is the belts width in mm. This is followed by a number e. g. 500 which corresponds to the pitch length Lp in mm. Belts not covered by the ISO standards are designated by a code consisting of a set of 3 numbers e. g. 22 which denotes the belts top width followed by e. g. 8 which denotes the belts