Pay in 4 interest-free payments of $12.86 Learn more
Ships within 48 hours · Estimated delivery Aug 2 - Aug 7
The bulkhead piece will need to be glued to the front bulkhead under the bonnet and you may need to cut some holes or slit the material to fit this around various mechanicals
This design of door panel was used only on the Mini 1275GT models from 1969 to 1976
The rear load area mats are not included in this set as there were three different sizes used depending on the fitment of rear seats
which in turn is welded to the face panel on our High Frequency welding machine
These capping are made to the original VW concept utilising a vacuum formed outer skin
LEFT HAND GLOVE BOX 1953-62 MKIV 1970-73 The bulkhead piece will needYou will note from the photograph that on the outer side of this box there is a "recessed" area. The reason that this recess or cut out area is there, is because on the Series Two models the wiper motor was situated inside the dash area and interefered with the glove box if not modified in this way. Amazingly, this design was not altered until 1962 even though the wiper motor position was altered many years previously.